Skip to content
ตู้ควบคุมไฟฟ้า

ทำไมการระบายอากาศจึงสำคัญสำหรับตู้ควบคุมไฟฟ้า?

ความร้อนทำให้อายุการใช้งานของอุปกรณ์อิเล็กทรอนิกส์สั้นลง มาดูว่าพัดลมพร้อมฟิลเตอร์และช่องระบายช่วยระบายความร้อนและกันฝุ่นได้อย่างไร

โดย AZGA ELECTRIC5 นาที

พัดลมระบายอากาศพร้อมฟิลเตอร์ Alfa Electric ATV

บทความฉบับเต็มของหัวข้อนี้มีเฉพาะภาษาอังกฤษในเวอร์ชันต้นแบบ

สารบัญ
  1. Heat is the hidden enemy
  2. How a filter fan system works
  3. Sizing basics
  4. Maintenance

Heat is the hidden enemy

Every component in a panel dissipates power – drives, contactors, power supplies, even terminal blocks under load. Without enough air exchange, the internal temperature can climb well above ambient, which shortens the life of electronics and can cause nuisance tripping of temperature-sensitive devices.

How a filter fan system works

A filter fan draws cooler ambient air into the cabinet through a filter mat, while an outlet filter (exhaust grille) lets warm air leave, normally positioned high on the opposite side. Matching sizes keep the airflow balanced. In our catalog, the Alfa Electric ATV series ranges from 24 m³/h (ATV1100) to 500 m³/h (ATV5400) at 230 V, and the Plastim PTF1500 delivers 100 (140) m³/h with IP54 protection.

Sizing basics

The required airflow depends on the heat loss inside the panel, the allowed temperature rise and the enclosure surface area. Manufacturers provide formulas or calculators – as a rule, calculate the total heat loss from component datasheets, add a margin for dirty filters, and pair the fan with a thermostat (NO contact) so it runs only when needed.

Maintenance

  • Replace filter mats regularly – a clogged filter reduces airflow significantly.
  • Check that the fan runs when the thermostat calls for cooling.
  • Keep the airflow path inside the panel free of cable bundles.

คำถามที่พบบ่อย

Should the fan blow in or out?

Common practice is to blow filtered air in at the bottom and exhaust at the top through an outlet filter, creating slight positive pressure that helps keep dust out.

บทความตัวอย่างสำหรับเว็บไซต์ต้นแบบ — เนื้อหาจะได้รับการตรวจสอบโดยทีมเทคนิคของ AZGA ก่อนเผยแพร่

ต้องการความช่วยเหลือในการนำไปใช้กับโครงการของคุณ?

บทความที่เกี่ยวข้อง

เทอร์โมสตัท Alfa Electric THRV22 สำหรับตู้ไฟฟ้าตู้ควบคุมไฟฟ้าวิธีเลือกเทอร์โมสตัทสำหรับตู้ไฟฟ้าหน้าสัมผัส NO ใช้สั่งพัดลม หน้าสัมผัส NC ใช้สั่งฮีตเตอร์ คู่มือสั้น ๆ เรื่องชนิดหน้าสัมผัส ช่วงการตั้งค่า และพิกัดของเทอร์โมสตัทในตู้2 กันยายน 25695 นาทีภาพประชาสัมพันธ์อุปกรณ์ป้องกันไฟกระชาก Hakel จาก AZGA ELECTRICการป้องกันไฟกระชากอุปกรณ์ป้องกันไฟกระชาก (SPD) คืออะไร และทำงานอย่างไร?คู่มือฉบับเข้าใจง่ายเกี่ยวกับ SPD: ไฟกระชากเกิดจากอะไร SPD ระบายพลังงานอย่างไร และค่าพิกัดสำคัญที่ต้องดูเมื่อเลือกใช้28 ตุลาคม 25697 นาทีภาพอุปกรณ์ป้องกันไฟกระชาก Hakel กับฟ้าผ่าเหนืออาคารการป้องกันไฟกระชากSPD Type 1 กับ Type 2 ต่างกันอย่างไร?Type 1 รองรับกระแสฟ้าผ่าบางส่วนที่จุดจ่ายไฟเข้าอาคาร ส่วน Type 2 จำกัดไฟกระชากจากการเหนี่ยวนำและการสวิตชิ่งในตู้จ่ายไฟ อ่านวิธีเลือกได้ที่นี่14 ตุลาคม 25696 นาที