Skip to content
Electrical Safety

Common Electrical Protection Devices Used in Industrial Applications

MCB, MPCB, RCCB, RCBO, AFDD, SPD and protection relays – what each device protects against and where it is used.

By AZGA ELECTRIC6 min read

Eaton AFDD awareness graphic by AZGA ELECTRIC
On this page
  1. Overview
  2. Protection works as a system
  3. Monitoring relays

Overview

DeviceProtects againstTypical location
MCBOverload and short circuit of cablesFinal circuits, control circuits
MPCBMotor overload, short circuit, phase failureMotor starters
RCCBEarth leakage (shock and fire risk)Distribution boards with MCBs
RCBOEarth leakage + overload + short circuitIndividual final circuits
AFDDSeries and parallel arc faults (fire risk)Final circuits in sensitive buildings
SPDTransient over-voltageMain and sub-distribution boards
Protection relaysAbnormal voltage, frequency, phase sequence, earth leakageMain panels, pump and motor panels

Protection works as a system

No single device covers every hazard. A well-designed panel combines overcurrent protection, earth-leakage protection, surge protection and monitoring relays, each selected and coordinated for the application. Devices reduce risk – they do not remove the need for correct design, installation, earthing and maintenance.

Monitoring relays

Digital relays such as the Selec 900VPR (voltage protection) and 900ELR (earth leakage) watch the supply continuously and trip a contactor when parameters drift outside set limits – a cost-effective way to protect motors and pumps from phase loss, reversal or unbalance.

Frequently asked questions

What is the difference between an RCCB and an RCBO?

An RCCB detects earth leakage only and must be combined with overcurrent protection. An RCBO combines earth-leakage and overcurrent protection in one device.

Sample article for the prototype — content to be reviewed by the AZGA technical team before publishing.

Need help applying this to your project?