Skip to content
ความปลอดภัยทางไฟฟ้า

อุปกรณ์ป้องกันทางไฟฟ้าที่ใช้บ่อยในงานอุตสาหกรรม

MCB, MPCB, RCCB, RCBO, AFDD, SPD และรีเลย์ป้องกัน – แต่ละตัวป้องกันอะไรและใช้ที่ไหน

โดย AZGA ELECTRIC6 นาที

ภาพความรู้เรื่อง AFDD ของ Eaton จาก AZGA ELECTRIC

บทความฉบับเต็มของหัวข้อนี้มีเฉพาะภาษาอังกฤษในเวอร์ชันต้นแบบ

สารบัญ
  1. Overview
  2. Protection works as a system
  3. Monitoring relays

Overview

DeviceProtects againstTypical location
MCBOverload and short circuit of cablesFinal circuits, control circuits
MPCBMotor overload, short circuit, phase failureMotor starters
RCCBEarth leakage (shock and fire risk)Distribution boards with MCBs
RCBOEarth leakage + overload + short circuitIndividual final circuits
AFDDSeries and parallel arc faults (fire risk)Final circuits in sensitive buildings
SPDTransient over-voltageMain and sub-distribution boards
Protection relaysAbnormal voltage, frequency, phase sequence, earth leakageMain panels, pump and motor panels

Protection works as a system

No single device covers every hazard. A well-designed panel combines overcurrent protection, earth-leakage protection, surge protection and monitoring relays, each selected and coordinated for the application. Devices reduce risk – they do not remove the need for correct design, installation, earthing and maintenance.

Monitoring relays

Digital relays such as the Selec 900VPR (voltage protection) and 900ELR (earth leakage) watch the supply continuously and trip a contactor when parameters drift outside set limits – a cost-effective way to protect motors and pumps from phase loss, reversal or unbalance.

คำถามที่พบบ่อย

What is the difference between an RCCB and an RCBO?

An RCCB detects earth leakage only and must be combined with overcurrent protection. An RCBO combines earth-leakage and overcurrent protection in one device.

บทความตัวอย่างสำหรับเว็บไซต์ต้นแบบ — เนื้อหาจะได้รับการตรวจสอบโดยทีมเทคนิคของ AZGA ก่อนเผยแพร่

ต้องการความช่วยเหลือในการนำไปใช้กับโครงการของคุณ?

บทความที่เกี่ยวข้อง

ภาพประชาสัมพันธ์อุปกรณ์ป้องกันไฟกระชาก Hakel จาก AZGA ELECTRICการป้องกันไฟกระชากอุปกรณ์ป้องกันไฟกระชาก (SPD) คืออะไร และทำงานอย่างไร?คู่มือฉบับเข้าใจง่ายเกี่ยวกับ SPD: ไฟกระชากเกิดจากอะไร SPD ระบายพลังงานอย่างไร และค่าพิกัดสำคัญที่ต้องดูเมื่อเลือกใช้28 ตุลาคม 25697 นาทีภาพอุปกรณ์ป้องกันไฟกระชาก Hakel กับฟ้าผ่าเหนืออาคารการป้องกันไฟกระชากSPD Type 1 กับ Type 2 ต่างกันอย่างไร?Type 1 รองรับกระแสฟ้าผ่าบางส่วนที่จุดจ่ายไฟเข้าอาคาร ส่วน Type 2 จำกัดไฟกระชากจากการเหนี่ยวนำและการสวิตชิ่งในตู้จ่ายไฟ อ่านวิธีเลือกได้ที่นี่14 ตุลาคม 25696 นาทีภาพการเลือกเบรกเกอร์ Eaton จาก AZGA ELECTRICการป้องกันวงจรวิธีเลือก MCB ให้เหมาะกับงานอุตสาหกรรมพิกัดกระแส เส้นโค้งการทริป พิกัดตัดกระแสลัดวงจร และจำนวนโพล คือ 4 สิ่งที่กำหนดว่า MCB จะป้องกันวงจรได้อย่างเหมาะสมหรือไม่30 กันยายน 25697 นาที