Terminal Block
STH3
1.5- 6 sq. mm Stud Type Terminal Block – with captive nuts
- Rated Voltage
- 1000 V
- Rated Current
- 41 A
Click to zoom1.5 – 10 sq. mm Nut driver operated M4 sized Stud Type Terminal Blocks, with Universal Mounting Possibility
Key specifications
Prefer to talk? Call 02 194 0672
These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Approvals shown on source page
| Rated Voltage | 1000 V |
|---|---|
| Rated Current | 57 A |
| Tightening Torque | 1.2 Nm |
| Housing Material | Polyamide |
| Product Function | Feed Through |
| Wire Entry Orientation | Side Entry |
| Mounting Possibility | DIN 32/DIN 35/DIN 35-15 Rail |
| Stud Size | M4 |
| Operated by | Nut Driver |
| Rated Surge Voltage | 8 KV |
| Pollution Degree | 3 |
| Conductor Cross Section Stranded min. | 1.5 mm² |
|---|---|
| Conductor Cross Section Stranded max. | 10 mm² |
| Conductor Cross Section AWG/Kcmil min | 22 AWG |
| Conductor Cross Section AWG/Kcmil max | 6 AWG |
| 2 Conductors with same Cross Section Stranded min | 1.5 mm² |
| 2 Conductor with same Cross Section Stranded max | 10 mm² |
| Stripping Length | mm |
| Height with DIN 32 rail | 46.3 mm |
|---|---|
| Height with DIN 35 x 15 mm rail | 48 mm |
| Height with DIN 35 x 7.5 mm rail | 40.7 mm |
| Length | 50 mm |
| Width (Thickness) | 17 mm |
No technical drawings were published for this product on the existing website.
Send us your quantities and requirements — our team will reply with a quotation.