Skip to content
Connectwell STH6 – 1.5- 35 sq. mm  a Stud Type Terminal Block – with captive nutsClick to zoom
ConnectwellTerminal Block

STH6

1.5- 35 sq. mm a Stud Type Terminal Block – with captive nuts

Brand:
Connectwell
Model:
STH6
Series / group:
Stud Feed Through

Key specifications

Rated Voltage
1000 V
Rated Current
125 A
Max. Cross Section
35 mm²
Width
18 mm
Download Datasheet

Prefer to talk? Call 02 194 0672

Overview

1.5- 35 sq. mm STH6 a Stud Type Terminal Block – with captive nuts. These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.

Approvals shown on source page

CECSAULVDEIECEE CBLloyd's Register

Technical Specifications

Technical Data

Rated Voltage1000 V
Rated Current125 A
Tightening Torque3 Nm
Housing MaterialPolyamide
Product FunctionFeed Through
Wire Entry OrientationSide entry
Mounting PossibilityDIN 32/DIN 35/DIN 35-15 Rail
Screw SizeM6
Stud SizeM6
Operated byScrew Driver
Rated Surge Voltage8 KV
Pollution Degree3

Connection Data

Conductor Cross Section Stranded min.1.5 mm²
Conductor Cross Section Stranded max.35 mm²
Conductor Cross Section AWG/Kcmil min22 AWG
Conductor Cross Section AWG/Kcmil max2 AWG
Stripping Lengthmm

Dimensions

Height with DIN 32 rail68 mm
Height with DIN 35 x 15 mm rail70.6 mm
Height with DIN 35 x 7.5 mm rail63.1 mm
Length63.9 mm
Width (Thickness)18 mm

Dimensions & Technical Drawings

No technical drawings were published for this product on the existing website.

Accessories

Cat. No.DescriptionStd. pack
CA702End Clamp in Polyamide 66 suitable for Din 32 / Din 35 / Din 35-15 Rails50
CA802End Clamp in Polyamide suitable for Din 35 / Din 35-15 Rails50
EPSTH6End Plate in Grey colour suitable for STH6 Terminal Block50
CA774/2Pre Assembled Shorting Link Assemblies with 2 poles100
CA774/3Pre Assembled Shorting Link Assemblies with 3 poles100
CA774/4Pre Assembled Shorting Link Assemblies with 4 poles100
CA509/K16Marking Tag Blank suitable for CTS35UNA / CGT35U Terminal Blocks100

Downloads & Resources

Need pricing or a technical recommendation?

Send us your quantities and requirements — our team will reply with a quotation.