Terminal Block
PTB70/95
1.5 – 95 sq. mm Nut driver operated M8 sized Stud Type Power Terminal Blocks
- Rated Voltage
- 1000 V
- Rated Current
- 232 A
Click to zoom16 – 120 sq. mm Nut driver operated M10 sized Stud Type Power Terminal Blocks
Key specifications
Prefer to talk? Call 02 194 0672
CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Approvals shown on source page
| Rated Voltage | 1000 V |
|---|---|
| Rated Current | 269 A |
| Tightening Torque | 10 Nm |
| Housing Material | Polyamide |
| Product Function | Feed Through |
| Wire Entry Orientation | Side Entry |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
| Stud Size | M10 |
| Operated by | Nut Driver |
| Rated Surge Voltage | 8 KV |
| Pollution Degree | 3 |
| Conductor Cross Section Stranded min. | 16 mm² |
|---|---|
| Conductor Cross Section Stranded max. | 120 mm² |
| Conductor Cross Section AWG/Kcmil min | 8 AWG |
| Conductor Cross Section AWG/Kcmil max | 250 kcmil |
| Conductor Cross Section Stranded with Ferrule/Lug min | 16 mm² |
| Conductor Cross Section Stranded with Ferrule/Lug max | 120 mm² |
| Stripping Length | mm |
| Height with DIN 35 x 15 mm rail | 54.5 mm |
|---|---|
| Height with DIN 35 x 7.5 mm rail | 47.3 mm |
| Length | 100 mm |
| Width (Thickness) | 48 mm |
No technical drawings were published for this product on the existing website.
Send us your quantities and requirements — our team will reply with a quotation.