Terminal Block
PTB70/95SH
1.5 – 95 sq. mm Nut driver operated M8 sized Stud Type Power Terminal Blocks
- Rated Voltage
- 1000 V
- Rated Current
- 232 A
Click to zoom1.5 – 95 sq. mm Nut driver operated M8 sized Stud Type Power Terminal Blocks
Key specifications
Prefer to talk? Call 02 194 0672
PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail. Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Approvals shown on source page
| Rated Voltage | 1000 V |
|---|---|
| Rated Current | 232 A |
| Tightening Torque | 10 Nm |
| Housing Material | Polyamide |
| Product Function | Power Terminal Block |
| Wire Entry Orientation | Side Entry |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
| Stud Size | M8 |
| Operated by | Nut Driver |
| Rated Surge Voltage | 8 KV |
| Pollution Degree | 3 |
| Conductor Cross Section Stranded min. | 1.5 mm² |
|---|---|
| Conductor Cross Section Stranded max. | 95 mm² |
| Conductor Cross Section AWG/Kcmil min | 8 AWG |
| Conductor Cross Section AWG/Kcmil max | 4/0 AWG |
| 2 Conductors with same Cross Section Stranded min | 1.5 mm² |
| 2 Conductor with same Cross Section Stranded max | 95 mm² |
| Stripping Length | mm |
| Height with DIN 35 x 15 mm rail | 84.5 mm |
|---|---|
| Height with DIN 35 x 7.5 mm rail | 76.6 mm |
| Length | 130 mm |
| Width (Thickness) | 32 mm |
No technical drawings were published for this product on the existing website.
Send us your quantities and requirements — our team will reply with a quotation.