Terminal Block
ODL2.5
2.5 sq.mm Offset Double Level Terminal Blocks
- Rated Voltage
- 800 V
- Rated Current
- 24 A
Click to zoom0.2-4 sq.mm Double Level Internally Shorted Terminal Blocks
Key specifications
Prefer to talk? Call 02 194 0672
ODL4U Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODl4U sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible at both levels.
| Rated Voltage | 800 V |
|---|---|
| Rated Current | 32 A |
| Tightening Torque | 0.5 Nm |
| Housing Material | Polyamide |
| Product Function | Double Level |
| Wire Entry Orientation | Side Entry |
| Mounting Possibility | DIN 32/DIN 35/DIN 35-15 Rail |
| Screw Size | M3 |
| Operated by | Screwdriver |
| Rated Surge Voltage | 6 KV |
| Pollution Degree | 3 |
| Conductor Cross Section Stranded min. | 0.2 mm² |
|---|---|
| Conductor Cross Section Stranded max. | 4.0 mm² |
| Conductor Cross Section AWG/Kcmil min | 22 AWG |
| Conductor Cross Section AWG/Kcmil max | 10 AWG |
| Conductor Cross Section Stranded with Ferrule/Lug min | 0.2 mm² |
| Conductor Cross Section Stranded with Ferrule/Lug max | 4 mm² |
| 2 Conductors with same Cross Section Stranded min | 0.2 mm² |
| 2 Conductor with same Cross Section Stranded max | 2.5 mm² |
| Conductor Cross Section Solid min | 0.2 mm² |
| Conductor Cross Section Solid max | 6 mm² |
| 2 Conductors with same Cross Section Stranded with TWIN Ferrule/Lug min | 0.2 mm² |
| 2 Conductor with same Cross Section Stranded with TWIN Ferrule/Lug max | 2.5 mm² |
| Stripping Length | 9 mm |
| Internal Cylindrical Guage | A4 |
| Height with DIN 32 rail | 69.2 mm |
|---|---|
| Height with DIN 35 x 15 mm rail | 71.7 mm |
| Height with DIN 35 x 7.5 mm rail | 65 mm |
| Length | 68 mm |
| Width (Thickness) | 6 mm |
No technical drawings were published for this product on the existing website.
Send us your quantities and requirements — our team will reply with a quotation.