Skip to content
Connectwell STH4DTSH – 6 sq. mm M4 Stud Disconnect & Test shorted Terminal Block – with captive nutsคลิกเพื่อขยาย
ConnectwellTerminal Block

STH4DTSH

6 sq. mm M4 Stud Disconnect & Test shorted Terminal Block – with captive nuts

แบรนด์:
Connectwell
รุ่น:
STH4DTSH
ซีรีส์ / กลุ่ม:
Stud Feed Through

สเปกหลัก

Rated Voltage
1000 V
Rated Current
34 A
Max. Cross Section
6 mm²
Width
22 mm
ดาวน์โหลด Datasheet

ต้องการคุยโดยตรง? โทร 02 194 0672

ภาพรวมสินค้า

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DTSH Terminal Block has 2 STH4DT Terminal Blocks shorted to achieve switchable cross connection for current transformers. Two lugs can be connected to the Terminal without scrificing the safety of the Terminal Block.

* รายละเอียดสินค้าแสดงเป็นภาษาอังกฤษตามข้อมูลจากผู้ผลิต

มาตรฐานรับรองที่แสดงในหน้าต้นฉบับ

CECSAULVDEIECEE CBLloyd's Register

ข้อมูลทางเทคนิค

Technical Data

Rated Voltage1000 V
Rated Current34 A
Tightening Torque1.2 Nm
Housing MaterialPolyamide
Product FunctionFeed Through
Wire Entry OrientationSide Entry
Mounting PossibilityDIN 32/DIN 35/DIN 35-15 Rail
Stud SizeM4
Operated byScrewdriver
Rated Surge Voltage8 KV
Pollution Degree3

Connection Data

Conductor Cross Section Stranded min.1.5 mm²
Conductor Cross Section Stranded max.6 mm²
Conductor Cross Section AWG/Kcmil min22 AWG
Conductor Cross Section AWG/Kcmil max8 AWG
Conductor Cross Section Stranded with Ferrule/Lug min1.5 mm²
Conductor Cross Section Stranded with Ferrule/Lug max6 mm²
2 Conductors with same Cross Section Stranded min1.5 mm²
2 Conductor with same Cross Section Stranded max6 mm²
Conductor Cross Section Solid min1.5 mm²
Conductor Cross Section Solid max10 mm²

Dimensions

Height with DIN 32 rail56.4 mm
Height with DIN 35 x 15 mm rail59 mm
Height with DIN 35 x 7.5 mm rail52.2 mm
Length86 mm
Width (Thickness)22 mm

ขนาดและแบบทางเทคนิค

เว็บไซต์เดิมไม่มีแบบทางเทคนิคสำหรับสินค้านี้

อุปกรณ์เสริม

รหัสสินค้ารายละเอียดบรรจุ
EPSTH4DTEnd Plate in Grey colour suitable for STH4DT / STH4DTSH Terminal Block50
CA514/13-2Insulated Removable Shorting Link available in 2 Pole100
CA514/13-3Insulated Removable Shorting Link available in 3 Pole50
CA514/13-4Insulated Removable Shorting Link available in 4 Pole50
QJ11/22 Pole shorting Plug for STH4DT Terminal Block25
QJ11/44 Pole shorting Plug for STH4DT Terminal Block25
CA514/14-2Insulated Ring Type Shorting Link for 2 way Shorting100
CA514/14-3Insulated Ring Type Shorting Link for 3 way Shorting50
CA514/14-4Insulated Ring Type Shorting Link for 4 way Shorting50
CA514/14-3AInsulated 3 way Alternate Type Shorting Link10
CA514/14-4AInsulated 4 way Alternate Type Shorting Link10
CA512/13-2Removable Shorting link available in 2 Pole100
CA512/13-3Removable Shorting link available in 3 Pole50
CA512/13-4Removable Shorting link available in 4 Pole50

เอกสารและดาวน์โหลด

ต้องการราคาหรือคำแนะนำทางเทคนิค?

ส่งจำนวนและความต้องการของคุณมา ทีมงานจะติดต่อกลับพร้อมใบเสนอราคา